LRC 2020 - Little Robot Challenge 2020

Build Days, community, GBWC Australia, GunPla, LRC -

LRC 2020 - Little Robot Challenge 2020

LRC 2020 postposed until further notice due to COVID-19. At this stage we plan to re-schedule it for Sep or Oct 2020.

--------------------------------------

This year we will be collaborating with WASMEX  and holding LRC 2020 at the Cannington Exhibition Centre on the 2nd and 3rd of May 2020. Generously co-sponsored by HobbyCo and Scale Modellers Supply (SMS).

  

Category

  • GunPla Open - open to all ages
  • Mecha Open - open to all ages

 

Judging Criteria

  • Craftsmanship, finishing and concept

  

Event Dates

  • 2nd & 3rd May 2020

 

Important Dates

  • 2nd May 2020 - All entries must be submitted by between 10am to 2pm only
  • 3rd May 2020 - All entries must be collected between 5pm to 6:30pm only
  • Note that all entrants are responsible to transport their entries to the event and to collect the entries at the end of the event at the allocated time slot.

 

Venue

  • Cannington Exhibition Centre, Corner Albany Highway & Station Street, Cannington WA 6107

 

Competition Judge

  • TBA

 

Prizes

  • Prizes sponsored by HobbyCo, SMS & Little Robot

 

Minor Entrants

Please read the rules listed with your guardian before entry. Submissions will be accepted under the assumption that you have obtained your guardians consent.

 

Entrants Eligibility

  1. To be eligible to enter to the competition, an individual entrant must reside in the areas of the competition at the time of entry.
  2. Minor entrants must have guardian's consent.
  3. Professional and amateur are all welcome to enter.

 

Rules for GunPla Open

  1. The model must be created with original GunPla kits by BANDAI
  2. Limit of one entry per person
  3. The model must be made by the entrant
  4. The model must be in dimensions no larger than 48cm x 48cm x 48cm
  5. 3D printer produced parts will be subjected to disqualification
  6. Use of copied or bootleg products is prohibited and will be subjected to disqualification

 

Rules for Mecha Open

  1. The model can be scratch built, kitbashed or created using products from any licensed manufacturers
  2. Limit of one entry per person
  3. The model must be made by the entrant
  4. The model must be in dimensions no larger than 48cm x 48cm x 48cm
  5. 3D printer produced parts will be subjected to disqualification
  6. Use of copied or bootleg products is prohibited and will be subjected to disqualification

 

Prohibition

  1. Use of copied and counterfeit products, licensor unauthorised GUNDAM/GUNPLA accessory products are prohibited.
  2. Contestant work, description and other details which are against any rules and regulation from this contest will be forfeited from the contest without any prior notice.
  3. Little Robot has the right to disqualify the entry or delete images from the website if the model is or may be considered as listed below:
    1. Use of copied and counterfeit products are prohibited.
    2. We prohibit the entry of a work which encroach or may encroach upon any third party's portrait rights, intellectual property rights such as copyright and any other rights.
    3. No company logos, trademarks or product lettering etc may be used unless prior permission has been obtained from the rights holder.
    4. The entrant will be fully responsible for its settlement as well as any cost which may occur in case of any disputes resulting from the submitted models. The entrant is also responsible for compensations for any damages for Little Robot and or the third parties.
    5. Work which is contrary to morality or public order.
    6. Work which contains personal information.
    7. Work which contains slanderous expressions toward certain persons or groups.
    8. Inappropriate works which is not consistent with the purpose of this competition.
    9. Work which is mimicked or copied off of someone else's work.
    10. Work which infringes on a third-party's copyright.

 

Notice

  1. Contestants who violate any of the rules and regulation, the organiser has all rights to disqualify the winner and collect all prizes that were awarded
  2. Organiser will contact the contestant directly if an investigation is needed
  3. If the contestant is uncontactable, the work will be forfeited
  4. During the investigation contestant are required to send photos for more reference
  5. If the contestant is unable to provide the photos, the work will be forfeited
  6. Contestant that uses any copyrights background/character that will infringe on the rights of third parties, will be removed or will be asked to revise prior disclosure
  7. Contestant may need to seek for approval if they’re using any 3rd parties’ background that they purchase online or from any search engines
  8. Contestant is allowed to use their past work that took part in other contest however contestant may need to seek approval from the previous contest organiser

 

Use of submitted entries by Little Robot and others

  1. By entering, contestants agree to Little Robot and others who are appointed by Little Robot to use submitted entries (photograph, title, comments, winning models' images, images which were sent to Little Robot for the final judging and actual winning pieces) for promotional purposes.
  2. Little Robot will have the right to make corrections within the scope of the entries as follows, but not limiting to:
    • adjusting colours
    • cropping
    • correcting typographical errors in comments and title
    • editing comments etc

 

Confidentiality Agreement

  1. By entering the competition, personal information obtained in this event will be used for the following purposes:
  2. Managing entries in the competition
  3. Contacting entrants to verify and/or to inform winning announcements as well as inquiry correspondence
  4. Displaying the submitted work with the contestant's name etc as well as other purposes for using works
  5. Personal information obtained in this event will not be provided to a third party without consent of participant unless it is under conditions that are necessary for fulfilling legal obligations, and to use for publications and other things that are listed on the official rules

 


35 comments

  • oqnlmfwfuz

    Muchas gracias. ?Como puedo iniciar sesion?

  • LdreYiAmO

    KEzMaOgLVIQCftb

  • TZDSldEAeJihQLt

    AuMvtSJxFXckrlQL

  • orCMjSHpi

    CcTogbznR

  • qBtPcTxNs

    GXDFjutxiA

Leave a comment

Sale

Unavailable

Sold Out